Machining

The affordable system with high performance allows threading and / or circlip grooving in high precision. The polygonal connection of insert and milling body improves the efficiency and precision of the process significantly:

• 1Longer tool life
• 2Higher machining volume
• 3Higher feed rates
• 4Shorter processing times
• 5High stability
• 6High security at interrupted cutting

Affordable and flexible system for short processing times and long tool lifes.

• 1Deep, true to gauge threads
• 1Accurate free-form contours
• 1Accurate grooving

Bottom threads can be cut almost to the bottom without undercuts. By using the same pitches, the storage and acquisition costs decrease also.

Smooth cutting and low cutting pressure results in high surface quality and long tool lifes. A conical position of insert pocket guarantees stability of the tool shaft. Further advantages are a radially back ground thread profile, extremely high wedge angle, a more stable cutting edge as well as a positive rake angle. The optimum application area are fine threads and/or very short thread lengths.

• 1Thread milling
• 2Thread milling with undercut
• 3Drill milling

Extensive range of solid carbide thread milling cutters

• 1Spiral-grooved grooves
• 2Soft cut
• 3Excellent surface qualities
• 4Also for thin-walled workpieces
• 5A tool for right- and left-hand threads

Multi tooth thread milling cutters, ideal for short thread lengths and very rigid clamping of workpiece and cutter.

Sectional thread milling for high-quality large threads from M24.

STC-1 with 10 edges Biggest advantage for any long threads from M24: A shorter process time compared to cutters with inserts and easier assembly.

STC-2 and STC-3 Depending on the thread length (pitch, material) much faster than STC-1.